Belt-type bucket elevator ELS-160

APPLICATION

The belt-type bucket elevator ELS (M)-160 is used for vertical lifting of various free-flowing fine- grained and lump noncaking and nonsticking materials with mesh size up to 20 mm and with bulk density up to 2 g/cm³ in workshops at environmental air temperature of -30 C to 50 C. 

The belt-type bucket elevator feeds the material from a lower section filling hopper by force of a centrifugal discharge scoop through an upper section branch tube or another transporter with specified productivity.

BASIC TECHNICAL SPECIFICATIONS 
  

Parameter name	Parameter value
Length between drum axes of a power-drive station and tension station, mm	Depends on concrete project
Belt running speed, m/s	1,4
Rated capacity, m3/hour	11,5 (5,7)
Bucket's width, mm	160
Buckets spacing, mm	320
Diameter of driving drum, mm	450
Diameter of lower drum, mm	450
Traction equipment - elevator belt	200 EP 630/4 4/2 Y NOR
Rotation frequency of driving drum, rpm	61
Gear motor type	Flat - fillister
Type of tensioning device	screw
Power supply voltage, B	380+38
Electrical frequency, Hz	50+1